Axial SCX10 III "Jeep JT Gladiator" RTR 4WD Rock Crawler w/Portal Axles w/DX3 2.4GHz Radio

Axial SCX10 III "Jeep JT Gladiator" RTR 4WD Rock Crawler w/Portal Axles w/DX3 2.4GHz Radio

USD 266.00
Brand:
Product Code: MGT0575381
Availability: In Stock
Viewed 49 times

Available Options

Product Description

Axial SCX10 III "Jeep JT Gladiator" RTR 4WD Rock Crawler w/Portal Axles w/DX3 2.4GHz Radio


The Axial SCX10 III "Jeep JT Gladiator" RTR 4WD Rock Crawler with Portal Axles incorporates the key components that have made the Axial SCX10 series successful - but takes realism and detail to a higher level. The SCX10 III includes a replica V8 engine to house the front-mounted 540 motor. It's mated to a realistic transmission housing and transfer case, just like a 1:1 vehicle. Sitting on top of AR45 portal axles and powered by a Firma 40A ESC, the Axial SCX10 III is ready to hit the trail.


Features:

  • Replica V8 engine cover, transmission housing and transfer case cover and protect the motor while improving scale appearance and adding forward-mounted weight.
  • AR45 Portal Axles feature an offset front housing for realistic looks.
  • Axle housings also use portal gears for increased ground clearance and a universal that provides 45 degrees of steering.
  • Differential locker features Hypoid gears, allowing for smaller size gears, improved gear reduction and reduced torque twist.
  • Centered battery position improves chassis balance with front-mounted motor.
  • Hard anodized oil-filled shocks feature shock cap with bleed screw for easier rebuilds.
  • Improved materials increase durability and stiffness while holding tighter tolerances to eliminate most "slop".
  • Extended 13.9 inch wheelbase with longer frame rails and chassis supports a more realistic version of the Jeep JT Gladiator body.


Specifications:

  • Scale: 1/10
  • Length: 22.25in (565 mm)
  • Width: 9.25in (235 mm)
  • Height: 9.5in (241 mm)
  • Ground Clearance: 3in (76.2mm)
  • Wheelbase: 13.9in (353 mm)
  • Weight: 7lbs (3175g)
  • Drivetrain: 4WD
  • Gear Pitch: 32-Pitch
  • Pinion: 14T
  • Spur Gear: 40T
  • Final Drive Ratio: 45.6:1 Low / 31.3:1 High
  • Max Battery Dimensions: 5.45x1.83x1.38in (138.5x46.5x35mm)
  • Completion Level: Ready-To-Run


Includes:

  • (1) Axial SCX10 III Jeep JT Gladiator 4WD with:
  • (1) Spektrum Firma Smart 40A ESC/Receiver (installed)
  • (1) Spektrum 15kg Servo (installed)
  • (1) Spektrum DX3 DSMR Radio
  • (1) Product Manual


Needed to Complete:

  • Vehicle Battery (accepts standard and shorty packs)
  • Compatible charger

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good