HPI Vorza FLUX RTR 1/8 4WD Electric Brushless Buggy
- Brand: HPI
- Product Code: HPI215611MT
- Availability: In Stock
HPI Vorza FLUX - Ultimate 6S Brushless Power
6S LiPo Capable. FLUX 2200kV Brushless Motor. Ultra-Low Center of Gravity.
The HPI Vorza FLUX 1/8 RTR 4WD Electric Brushless Buggy delivers breathtaking ballistic speed combined with world championship-winning suspension handling. Engineered to handle extreme 6S LiPo power, this buggy features an all-metal drivetrain, a heavy-duty 4mm aluminum chassis, and a specialized twin-clamp style cast aluminum motor mount to keep the powertrain locked in place under massive torque loads. Whether tearing up the track or launching off massive bmx jumps, the Vorza FLUX is built to dominate.
Pro-Level Chassis with Flat-Line Layout
To ensure razor-sharp handling at insane speeds, all electronic and mechanical components on the Vorza FLUX are designed to sit perfectly flat on the 4mm monocoque chassis. This provides a super-low center of gravity (CG) for supreme cornering confidence. Bumping and landing management are controlled by large 16mm threaded Big Bore shocks, front/rear sway bars, and high-strength inverse steering blocks equipped with front universal joint driveshafts.
FLUX 6S Brushless System
Driven by the relentless FLUX MLH-2200kV motor and managed by the waterproof 150A ELH-6S ESC, providing instantaneous throttle response and mind-blowing top speeds.
Adjustable Battery Layout
The heavy-duty, adjustable battery tray can comfortably accommodate a single large 4S/6S pack or dual 2S/3S LiPo configurations to suit your running style.
Hardened Spiral-Cut Gears
Equipped with high-strength steel pinion and spur configurations utilizing spiral-cut bevel gears inside three oil-filled 4-gear differentials for bulletproof delivery.
Technical Specifications
| HPI VORZA FLUX PRODUCT DATA | |
|---|---|
| Chassis Data | |
| Scale Size | 1/8 Scale |
| Assembly Level | RTR (Ready-To-Run) |
| Drive Type | Shaft-Driven 4WD |
| Chassis Material | 4mm Anodized Aluminum Chassis & Shock Towers |
| Length | 508mm |
| Width | 205mm |
| Height | 178mm |
| Wheelbase | 325mm |
| ESC Data (FLUX ELH-6S) | |
| Input Voltage Range | 3S - 6S LiPo compatible |
| Current (Cont. / Burst) | 150A Continuous / 950A Burst |
| BEC Output | 6V / 3A Switching BEC |
| Battery Connectors | Dual T-Style Plugs |
| Motor Data (FLUX MLH-2200) | |
| Motor kV Rating | 2200 kV |
| Voltage Limits | 4S - 6S LiPo max |
| Motor Shaft / Bullet | 5mm Heavy-Duty Shaft / 6.5mm Gold Connectors |
What's Included in the Box?
- (1) Factory-Assembled HPI Vorza FLUX 1/8 Buggy Chassis
- Pre-Painted Aerodynamic Body with Slick Speed Graphics
- Pre-Installed 2200kV FLUX Motor & 150A ESC System
- High-Torque Metal Geared Steering Servo
- 2.4GHz Radio Remote Control System
- Pre-Mounted High-Grip All-Terrain Racing Tires
Needed to Complete:
- (1) Compatible LiPo Battery Charger
- (4) AA Batteries (for the Transmitter)
- For 4S Setup: (2) Matching 2S LiPo Packs (4000mAh 40C minimum) with T-Style plug
- For 6S Setup: (2) Matching 3S LiPo Packs (4000mAh 40C minimum) with T-Style plug
Brushless Power Pro-Tip: Running on full 6S LiPo power generates severe torque and top speeds that push tire compound limits. Always ensure your wheel hex nuts are checked and tightened securely before running. The cast aluminum twin-clamp motor mount prevents any motor flexing or shifting, protecting your gear mesh even during hard high-flying landings.
Tags: HPI, Cars & Trucks